Cement Remover

Vulcaseal Cement Remover uniquely removes grout, cement, concrete and tartar deposits from stone surfaces.

The acid-free formulation does not alter the appearance of the substrate nor does it change the surface porosity.

Vulcaseal Cement Remover has natural molecules that when synthesised, becomes an excellent remover product that destructs cement and tartar deposits.

Application Guide

  • 01

    Consult MSDS before use.

    Always carry out a test first to ensure the finished result is acceptable.

    Shake the container well.

    Pour the product onto the surface and use a stiff brush to work in.

  • 02

    Allow the product to act for 10 minutes. Do not allow to dry.

    Agitate with a stiff brush again.

  • 03

    Thoroughly rinse the surface with water. On exterior surfaces, a pressure washer is recommended.

    Protect the surface after using a recommended sealer from the Vulcaseal range.

Product Information


Eliminates grout and cement residue.
Does not alter the appearance or porosity of the substrate.
Acid-free formulation.

Product Size

1 ltr


5m² per litre

Chemical Composition

Surfactants and foaming agents: comply with European Directives EEC 82/242 and 82/243.


24 months from the date of manufacture in original unopened container in a clean, dry area and ideally at 20-25°C.

Technical Data

Physical State at 20°C Liquid
Appearance Pale Yellow
Odour Mild
pH 1.0 ± 1.5
Density 1.01 Kg/L

Health and Safety

Harmful if swallowed.
Causes severe skin burns and eye damage.
Keep out of reach of children.
Wear protective gloves/protective clothing/eye protection/face protection.
If swallowed: Immediately call a Poison Center or doctor.
If in eyes: Rinse cautiously with water for several minutes. Remove contact lenses, if present. Continue rinsing.

Technical Overview


Tiled surface with Cement residue.


Result on surface after using Vulcaseal Cement Remover.