Application Guide
-
01
Consult MSDS before use.
Always carry out a test first to ensure the finished result is acceptable.
Do not apply when temperature of the surface is below 5°C or above 30°C.
Remove any loose soiling from the surface using a stiff brush.
Shake the container well and pour the product neat into the Vulcaseal Spray Applicator.
-
02
Spray generously on the affected area and leave the product to act for up to 120 minutes.
Agitate the surface using a stiff brush.
-
03
For optimum results, use a pressure washer to thoroughly rinse the surface. Alternatively use a hose and stiff brush.
For heavily soiled surfaces, reapply until desired result is accomplished.
Ensure all equipment is cleaned after use.
Product Gallery
Product Information
Characteristics
Effective removal of organic soiling.
Long lasting results.
Does not alter or damage the substrate.
Product Size
1 ltr & 5 ltr
Coverage
3 - 5m² per litre
Chemical Composition
Surfactants and foaming agents: comply with European Directives EEC 82/242 and 82/243.
Storage
5 years unopened and stored in a dry and frost free conditions.
Technical Data
Physical State at 20°C | Liquid |
Appearance | Clear |
Odour | Characteristic |
pH | >10 |
VOC | 0 g/l |
Boiling Point | 100 |
Density | 1.2 Kg/L |
Health and Safety
Safety goggles recommended.
Safety gloves recommended.
Wear respiration equipment if lack of ventilation.
In case of ingestion do not provoke vomiting, contact a doctor or a specialist.
Keep out of the reach of children.
Technical Overview


Before
Stone surface with heavy algae growth.
After
Result on surface of using Vulcaseal Green Remover.