Application Guide

01

Consult MSDS before use.

Always carry out a test first to ensure the finished result is acceptable.

Shake the can well before use.

Ensure the grout joints are free from dirt.

Vulcaseal Grout Cleaner & Restorer is recommended to be used first.
02

Spray approximately 10-16 inches from the surface in a sweeping motion.
03

Leave to dry for 20 mins.

In wet areas allow to cure for 24 hours.

A second or third coat may be required to obtain maximum protection.

Product Gallery

Product Information

Characteristics

20 year protection from water and dirt.
Can be applied immediately after grouting.
Fast drying and instant protection.
Does not change the appearance.
Suitable for all grout joints.

Product Size

500ml

Coverage

Depending on grout width and porosity up to 15m².

Chemical Composition

Surfactants and foaming agents: comply with European Directives EEC 82/242 and 82/243.

Storage

5 years in unopened container, stored in dry and frost free conditions.

Technical Data

Physical State at 20°C	Liquid
Appearance	Colourless
Odour	Solvent
pH	N/A
VOC	371 g/l

Health and Safety

R36/38 Irritant to eyes/skin.
S23 Do not breathe vapours.
S26 In case of contact with eyes, rinse immediately with water, seek medical advice.
S36/37/39 Wear Suitable protective clothing, gloves and eye/face protection.
S45 In case of accident or illness, seek medical advice (show label, if possible).
S51 Use only in well ventilated areas.
Container must be disposed of as hazardous waste.
Keep out of the reach of children.

Download the Datasheet

Download MSDS

Technical Overview

Before

Grout joints with build up of water penetration and dirt build up.

After

Result on surface after using Vulcaseal Grout Protector.

Grout Protector