Application Guide
-
01
Consult MSDS before use.
Always carry out a test first to ensure the finished result is acceptable.
Shake the container well.
Dilute the product up to 1:10 with water depending on the level of soiling.
Pour the product into the Vulcaseal Spray Applicator.
-
02
Generously spray onto the surface and allow the product to act for between 5 to 45 minutes depending on the level of soiling.
Agitate the surface using a scrubbing brush or scouring pad.
-
03
Rinse the surface thoroughly with warm water.
Product Gallery
Product Information
Characteristics
Effective against mild soiling and dirt build up.
Environmentally friendly and biodegradable.
Product Size
1 ltr & 5 ltr
Coverage
Up to 20m² per litre.
Chemical Composition
Surfactants and foaming agents: comply with European Directives EEC 82/242 and 82/243.
Contains less than 5% Non ionic surfactants.
Contains less than 5% Anionic surfactants.
Storage
12 months in unopened container, stored in dry and frost free conditions.
Technical Data
Physical State at 20°C | Liquid |
Appearance | Clear |
Odour | Mild |
pH | 9.5 ± 0.5 |
Boiling Point | 100 °C |
Density | 1.01 Kg/L |
Health and Safety
Wear protective gloves/protective clothing/eye protection/face protection.
If in eyes: Rinse cautiously with water for several minutes.
Remove contact lenses, if present. Continue rinsing.
If eye irritation persists: Get medical advice/attention.
Wash hands thoroughly after handling.
Keep out of the reach of children.
Technical Overview


Before
Stone surface with daily dirt build up.
After
Result on surface after using Vulcaseal Maintenance Cleaner.