Consult MSDS before use.
Always carry out a test first to ensure the finished result is acceptable.
Ensure the surface to be treated is free from dirt by using a cleaner from the Vulcaseal range.
For larger areas, the product in liquid format can be applied using the Vulcaseal Spray Applicator or can be applied by brush, on smaller areas.
Shake the container well and pour into the Vulcaseal Spray Applicator if spray applying, or into a small bucket if brush applying.
Spray or brush onto the surface until saturation.
Leave for 5 minutes and then apply a very moderate second application.
After 20 minutes buff away any excess product.
Allow treated surface to dry for 24 hours, free from water and dirt.
Full performance will be reached in 7 days.
Thoroughly clean all equipment after use with warm water.
Protection against water and staining.
Enhances the colour of the stone.
1 ltr & 5 ltr
Up to 10m² per litre.
Aqueous Polysiloxane Dispersion.
12 months in unopened container, stored in dry and frost free conditions.
|Physical State at 20°C||Liquid/Cream|
|pH||7 ± 0.5|
|Boiling Point||100 °C|
Health and Safety
Safety goggles recommended.
Safety gloves recommended.
In case of ingestion do not provoke vomiting. Contact a doctor or a specialist.
Keep out of the reach of children.
Effect of staining on Natural Stone Surface.
Result on surface of using Vulcaseal Natural Stone Sealer & Enhancer.