Rust Remover
Vulcaseal Rust Remover is specially formulated product that converts rust compounds into a water soluble solution without harming the substrate in any way.
Vulcaseal Rust Remover is suitable for use on many surfaces including marble, porcelain, quartz, granite and ceramics.
Application Guide
-
01Consult MSDS before use.
Always carry out a test first to ensure the finished result is acceptable.
Shake the container well.
On heavy contaminated surfaces apply the product neat as supplied. Dilute up to 1:10 with water for milder soiling depending on the extent.
-
02Pour the product into a bucket and use a brush to work into the surface.
Allow to act for 10 – 60 minutes depending on the extent of contamination.
Do not allow the surface to dry.
-
03Rinse thoroughly with hot water as well as using a stiff brush to agitate.
For external applications, a pressure washer is recommended.
Product Gallery
Product Information
Characteristics
Pulls out rust penetration from stone.
Does not harm the surface.
Product Size
1 ltr
Coverage
3m² per litre
Chemical Composition
Surfactants and foaming agents: comply with European Directives EEC 82/242 and 82/243.
Storage
24 months from the date of manufacture in original unopened container in a clean, dry area and ideally at 20-25°C
Technical Data
| Physical State at 20°C | Liquid |
| Appearance | Clear/Purple |
| Odour | Strong |
| pH | 7 ± 0.5 |
| Density | 1.11 Kg/L |
Health and Safety
Wear safety goggles.
Wear safety gloves.
Wear respiration equipment if lack of ventilation.
In case of ingestion do not provoke vomiting.
Contact a doctor or a specialist.
Keep out of the reach of children.
Technical Overview
Before
Heavy rust staining on Natural Stone Surface.
After
Result on surface result after using Vulcaseal Rust Remover.
