Vulcaseal delights in providing solutions and solving problems with all types of stone.
All frequently asked questions are listed below. If your question is not answered, then please contact our technical support team who will be very glad to support you.
Natural Stone Deep Cleaner is a powerful water based alkaline cleaner. This makes it biodegradable and safe to use on practically nearly every surface.
Vulcaseal always recommend trying a test area first before cleaning a larger area. Once this has been done and the results are satisfactory, pour or spray Natural Stone Deep Cleaner over the area you are about to clean. Leave this to act for 2-3 minutes and then begin scrubbing with a hard bristle brush, in a circular hand motion.
Once scrubbed, leave this for approximately 5-10 minutes and then scrub the surface clean with water – hot if possible. A pressure washer is also a good method of rising off. You can then soak the water up with a sponge or equivalent. This process works well when cleaning areas between 5 and 10 square metres at a time.
Surfaces must be clean and dry. Firstly clean the surface using Natural Stone Deep Cleaner and rinsed off with water. Once this has dried Vulcaseal Sealer’s can the be applied.
Vulcaseal Maintenance Cleaner can be used in all environments including kitchens and bathrooms. It is safe to use in food grade preparation areas for sterilising.
Maintain a treated stone surface with a product from the Vulcaseal Maintain range as common off-the-shelf household cleaning products can contain harmful caustics and bleaches, which in turn will affect the performance and longevity of the sealer.
Coverage depends on the porosity of the stone. Some indicative square metre figures are –
Surfaces must be clean and dry. Firstly clean the surface using Natural Stone Deep Cleaner and rinsed off with water. Once this has dried Vulcaseal Sealer’s can the be applied.
Yes. Due to the unique fluro polymer technology, unique to Vulcaseal, anything under the sealer can breathe out through the stone.
Yes. The Natural Stone Gloss Sealer will give a wet look and Natural Stone Sealer and Enhancer will give a darkening look.
On a façade this will be 10 years plus. On a ground surface, this can be anywhere from 3-10 years depending on the level of foot traffic and the maintenance schedule adhered to.
To discuss the Vulcaseal Range in more detail – Please don’t hesitate to get in touch with our team on 0845 528 1148 or info@vulcaseal.com
Vulcaseal distribute through resellers. Contact us to find your local stockist.
Vulcaseal Pressure Sprayer is recommended as it helps achieve even coverage when applying sealer’s to a larger surface areas. It holds 1.5l of product and has an adjustable nozzle for increased accuracy.